BLUETTI

BLUETTI Elite 30 V2

BLUETTI Elite 30 V2: 288 Wh, LiFePO4, 600 W continuous AC.

  • Capacity 288 Wh
  • Continuous AC 600 W
  • Weight 9.5 lb
  • Chemistry LiFePO4
  • Solar input 200 W

Check price

Manufacturer specs

Each figure links to the page it was read from. Use the ? buttons for plain-English definitions.

Figures below were read from the linked manufacturer pages on November 21, 2026. Listings change. Confirm the current spec sheet before you buy. Nothing here is a safety certification or a promise that a particular appliance will run.

Manufacturer specifications for BLUETTI Elite 30 V2
Spec Published figure Source
Capacity How much energy it stores — a 1,000 Wh unit runs a 100 W device about 8–9 hours after typical losses. 288 Wh s4.bluettipower.com
Continuous AC output The most wattage it can power at once without an overload warning. 600 W s4.bluettipower.com
Resistive boost (not surge) A higher-watt mode for some heating loads; it is not the same as a surge rating. 1,500 W s4.bluettipower.com
Battery chemistry LiFePO4 s4.bluettipower.com
Cycle life Full charge/discharge cycles before capacity drops to the stated remaining percentage. 3,000 bluettipower.com
Weight How heavy the station is to lift and carry. 9.48 lb (4.3 kg) s4.bluettipower.com
Solar input The most solar charging wattage the station is rated to accept. 200 W max s4.bluettipower.com
Ports Manual: AC 600 W total, 120 V, 5 A. Cigarette lighter 12 V / 10 A. DC5521 ×2. USB-A ×2. USB-C 100 W and USB-C 140 W. s4.bluettipower.com
UPS switchover ≤10 ms s4.bluettipower.com
Dimensions 250 × 178 × 167.5 mm (9.8 × 7 × 6.6 in) s4.bluettipower.com

Runtime examples

Calculator defaults: 90% depth of discharge, 85% inverter efficiency, 95% DC efficiency. Planning estimates, not lab measurements.

Use your own loads
Estimated runtime for BLUETTI Elite 30 V2 under common loads
Load scenario Estimated runtime
Compact fridge (70 W running, 40% duty) 7 h 52 min
Laptop 65 W USB-C + Wi-Fi router 10 W AC 3 h 14 min
12 V compressor cooler (45 W, 40% duty) 13 h 41 min

Notes from the source pages

  • Power Lifting up to 1500 W is for pure resistive loads and is not stored as surge; the manual does not list a separate AC surge wattage.
  • DC/solar input is 200 W max, 12–28 V, 10 A. Cycle count is from the product page; remaining capacity % after those cycles is blank.

Current deals for this station

All deals
  • BLUETTIBlack Friday

    BLUETTI Black Friday tiered cart savings

    Official BLUETTI US Black Friday terms: spend $2,000+ save $50, $3,000+ save $100, or $4,000+ save $150 (one tier per order, auto-applied where applicable). Promotion period 12:00 AM PST Nov 19, 2026 – 11:59 PM PST Nov 30, 2026. Continental US shipping addresses only.

    Applies to
    All BLUETTI stations in our catalog
    Timing
    Ends Nov 30, 2026 (11:59 PM PT)
    Source
    bluettipower.com · checked Nov 21, 2026

    We may earn a commission if you buy through this link, at no extra cost to you. How affiliate links work.

Price drop alert

Price alerts coming soon. Email price-drop notifications are paused until our transactional email provider is connected so every signup can be confirmed via double opt-in.

In the meantime, see current verified manufacturer promotions on the deals page. Privacy policy.

Compare with rivals

Open compare tool

Relevant use cases

More from BLUETTI

All stations

Sources

Manufacturer pages cited in the spec table, checked November 21, 2026. These citation links carry no affiliate parameters.

How specs are collected and compared: Methodology. Spot an outdated spec or broken link? Report an error .